Friday, September 21, 2018

NEW PRODUCTS – Large Plastic Snap Rivets (10-packs) – Long + Short

from NEW PRODUCTS – Large Plastic Snap Rivets (10-packs) – Long + Short
by Angelica

Composite 3946 3947

NEW PRODUCTS – Large Plastic Snap Rivets (10-packs) – Long + Short


Enter the world of cardboard construction and build playful robot friends!

Instead of slapping on tape or waiting for your hot glue to warm up, you can use these Large Plastic Snap Rivets! So easy to install. Just poke them through the cardboard and fasten with the back piece. This will ensure clean, movable joints and attachments. You can even remove them with some effort (but they’ll hold as long as you don’t pry them apart)

We’ve got these in two sizes, 9mm to 13mm AND 13mm to 16mm.

First up, the Large Short Plastic Snap Rivets!

3947 hand demoORIG 2918 09

Instead of slapping on tape or waiting for your hot glue to warm up, you can use these Large Plastic Rivets! They have a large honkin’ 19mm diameter rivet face, for mega surface contact. They’re so easy to install. Just poke or cut a 9mm diameter hole in your cardboard, then side one half through the front, one half through the back and snap them together. This will ensure clean, movable joints and attachments. They’re strong, and nearly impossible to remove once in place.

Unlike our smaller pop rivet packs (say that five times fast!), these are constructed with a larger, wider head (19mm).

3947 kit ORIG 2018 09

Works best with cardboard, foam or other thick materials, and can fit about 9mm to 13mm thick material. You can crunch the two halves together as much as you like to get a tighter fit. You can connect two pieces together with one rivet and they’ll rotate. Two rivets can be used if you want them to stay still.

3947 quarter ORIG 2018 09

If you need to connect some thicker material, check out the longer version of these rivets.

Now, the Large Long Plastic Snap Rivets!


3946 hand demo ORIG 2018 09

Unlike our previous pop rivet packs (say that five times fast!), these are constructed with a larger, wider head (approx 19mm) AND longer tails (approx 14mm), allowing you to craft with thicker cardboard.

Works best with 2 ply cardboard, cardstock or other paper products that are about 2mm thick. You can connect two pieces together with one rivet and they’ll rotate. Two rivets can be used if you want them to stay still.

3946 kit ORIG 2018 09

3946 quarter ORIG 2018 09

Grab some cardboard and get making!

In stock and shipping now! 

No comments:

Post a Comment