Printing Terminal for 7inch Raspberry Display with USB #3DThursday #3DPrinting

from Printing Terminal for 7inch Raspberry Display with USB #3DThursday #3DPrinting
by Pedro

DEV_Printer shares:

Printing should not be a problem 😉

for usb i used cables like the one on the picture, just cut the males of and solder it directly to your raspberry pi. You will find the cables on amazon or banggood.
for mounting the case to the middle part i used screws which where also used to mount fans in a PC (Computer Cooling Fan Mount Screws). Same for the Backplate. You’ll find them also an amazon
i used 30x30mm 5v fans
for mounting the base to the middle part you can use screws with 3mm diameter and 20mm length
in the base you can mount iron plates to weight it down
— plate size 80x60mm
— holes for plates 68x51mm and 3,5mm use also 3mm screws
to prevent the stand from sliping around, i used a 1,5mm mat which is also used in trunk of cars. Use a spray glue to fix it 😉
any questions? Just ask 😉

download the files on: https://www.thingiverse.com/thing:3489920


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

Comments